Precautions for Ultraviolet Sterilizing Lamp




We are full of bacteria and viruses, things we have touched, the air we breathe, pets in the house, corners that cannot be cleaned in the room... With the widespread use of Ultraviolet Sterilizing Lamps, more and more families choose to use Ultraviolet Sterilizing Lamp in daily life. Lamps are used for disinfection and sterilization, but what should we pay attention to when using Ultraviolet Sterilizing Lamps for disinfection and sterilization? This is the issue that everyone is most concerned about.

 

When using Ultraviolet Sterilizing Lamps, the environment should be kept relatively clean. Dust and water mist in the air will reduce the killing effect. When the indoor temperature is lower than 20 degrees Celsius or higher than 40 degrees Celsius, or the relative humidity is greater than 60%, it should be extended appropriately Exposure time; after scrubbing the floor, wait for the floor to dry before disinfecting with Ultraviolet Sterilizing Lamps; when using ultraviolet to disinfect the surface of the article, the irradiated surface should be directly irradiated by ultraviolet rays, and the radiation dose should be sufficient; the ultraviolet light source should not be irradiated to people, So as not to cause eye or skin damage.

 

In addition, when the Ultraviolet Sterilizing Lamp is working, people and pets need to leave, and some items that are not suitable for UV radiation need to be effectively covered. The radiation intensity of the Ultraviolet Sterilizing Lamp gradually decreases during the use process, so the intensity of the disinfection ultraviolet light should be measured frequently, and once it drops below the required intensity, it should be replaced in time.

Navigation